1. 采用PLC可編程序控制，可實現遠距離監控，觸摸屏操作，人機對話，操作、維護方便。

2. 動作元件采用電-氣/液壓自動控制。

3. 多重安全保護：轉速檢測，過振動保護，開蓋保護，電機過載過熱保護，刮刀旋轉機械/電氣雙重控制。

4. 焊接式整體機架，結構緊湊，機器承載強度高。

5. 全密閉結構，密封件采用硅橡膠或氟橡膠。

6. 獨立式液壓站，可隔離安裝，方便檢修。

7. 采用液力偶合器傳動(GK1250以下機型)，啟動平穩，控制簡單，有效保護電機不受過載損害。亦可用變頻器啟動，適用多種運行速度要求。

8. 浮動平臺底座，橡膠減振基礎。亦可選用阻尼式彈性減振器，減振效果優越，機器運轉平穩，減小機器振動對設備和環境的危害。

9. 二種出料方式選擇：斜槽開放式出料，結構簡單；螺旋輸送器與刮刀集成卸料，濾餅收集率高，有效防止堵料。

10. 虹吸式離心機具備虹吸推動力，過濾速度更快。可配置反沖洗裝置，對過濾介質進行洗滌再生。還可配置撇液裝置，適用含蛋白等膠體物質的物料分離。

1. PLC programmable control, remote monitoring, touch screen operation, man-machine dialogue, easy operation and maintenance.

2. The actuating components are automatically controlled by electric-pneumatic/hydraulic pressure.

3. Multiple safety protection: speed detection, over vibration protection, open cover protection, motor overload and overheating protection, scraper rotating machinery/electrical dual control.

4. Welded integral frame, compact structure, high bearing strength.

5. Fully sealed structure, seals using silicone rubber or fluorine rubber.

6. Independent hydraulic station, can be isolated installation, convenient maintenance.

7. Using hydraulic coupler transmission (GK1250 model below), smooth start, simple control, effective protection motor from overload damage.Frequency converter can also be used to start, suitable for a variety of speed requirements.

8. Floating platform base, rubber damping base.Can also choose the damping type elastic shock absorber, vibration reduction effect is superior, smooth operation of the machine, reduce the harm of machine vibration to the equipment and the environment.

9. Two kinds of discharging methods: chute open discharging, simple structure;Screw conveyor and scraper integrated discharge, filter cake collection rate is high, effectively prevent plugging.

10. The siphon centrifuge has the siphon impetus, the filtration speed is quicker.Backwash device can be configured to wash and recycle the filter media.It can also be equipped with a skimming device, which is suitable for material separation of colloidal substances such as protein.

臥式刮刀卸料離心機是連續運轉、間歇操作的過濾式離心機，控制方式為自動控制(也可手動控制)。

離心機操作過程中的進料、分離、洗滌、脫水、卸料及濾布再生等過程一般均在全速狀態下完成，單次循環時間短，處理量大，并可獲得較好的過濾（濾餅含水率較低）和洗滌效果。

GKH系列虹吸式離心機是在普通臥式刮刀卸料離心機的基礎上，利用虹吸原理增加過濾推動力，透過過濾介質的濾液全部進入濾液室，濾液通過虹吸管(撇液管)排出轉鼓，調節虹吸管吸入口位置可改變虹吸室內液面深度，以改變過濾推動力，調節過濾速度、處理能力、濾餅含濕量以及洗滌效率。

GKH系列離心機因具有虹吸功能，增加了過濾推動力，在處理粘度較大的物料時可以獲得較GK型更低的濾餅含水率。設置反沖裝置，可在需要時向虹吸室內加入反沖液，洗滌液經過濾介質流向轉鼓內，使過濾介質恢復過濾性能，得于再生。

Horizontal scraper discharge centrifuge is a continuous operation, intermittent operation of filter centrifuge, control mode for automatic control (manual control).

The feeding, separation, washing, dehydration, unloading and regeneration of press cloth in the process of centrifuge operation are generally completed at full speed, with short single cycle time, large processing capacity, and good filtration (low moisture content of filter cake) and washing effect.

GKH series siphon centrifuge is in ordinary horizontal scraper discharge centrifuge, on the basis of using the siphon principle to increase filter driver, all through the filter medium of filtrate into the filtrate chamber, the filtrate through siphon (prime fluid tube) discharge drum, adjust the siphon suction location can change the siphon indoor surface depth, to change the filter driver, adjust the filter speed, processing capacity, filter cake moisture content and the washing efficiency.

Due to the siphon function of GKH series centrifuge, it has increased the filtering impetus, and can obtain lower water content of filter cake than GK type when processing materials with higher viscosity.The recoil device can be installed to add the recoil liquid into the siphon room when necessary. The washing liquid will flow into the drum through the filter medium to restore the filtration performance of the filter medium and obtain regeneration.

虹吸式臥式刮刀卸料離心機適合于生產量大、要求濾餅含濕量低并充分洗滌的場合，廣泛應用于淀粉、碳酸氫鈉、磷酸鈣等物料的分離。

The siphon type horizontal scraper discharge centrifuge is suitable for the occasions of large production, low moisture content of filter cake and sufficient washing, and is widely used for the separation of starch, sodium bicarbonate, calcium phosphate and other materials.