1. 離心機均為上部卸料密閉型、間歇操作的過濾設備。物料由密閉機殼上的進料管加人轉鼓，在離心力場作用下，液相穿過過濾介質排出機外，固相物截留在轉鼓內，停機后打開機蓋從上部卸料。具有運轉平穩、操作簡便和進料、洗滌、脫水在密閉狀態下進行等特點。

2. 無基礎安裝，取消了傳統三足式懸掛結構，簡化安裝過程，設計合理，結構新穎簡潔，外觀美觀，清洗方便，基礎平板即為工作操作平臺，操作維護方便。

3. 轉鼓、機殼、基礎平板均拋光處理；所有緊固件軍為不銹鋼；傳動部件均為不銹鋼封閉；密封件均為硅橡膠，配清洗噴淋系統，整機符合GMP衛生要求。

4. 與平板連接的進口高粘度液態阻尼劑式隔振器使離心機因振動產生的能量全部被隔振器吸收，對基礎地面及周邊設備無振動干擾。

5. 機殼配置全開大翻蓋，卸料方便，密閉性好，特別適用于有毒、有害介質的固液分離，采用防爆電機變頻驅動、防靜電三角帶、充氮保護可適用于易燃易爆物料的固液分離。

6. 整機密閉性、防爆性、潔凈度好。

1. Centrifuges are closed upper discharge type, intermittent operation of filtration equipment.The material is added into the rotary drum by the feeding tube on the airtight housing. Under the action of centrifugal force field, the liquid phase passes through the filtration medium and is discharged from the machine. The solid phase material is retained in the rotary drum.It has the characteristics of smooth operation, simple operation, feeding, washing and dehydration in the closed state.

2. Without foundation installation, the traditional three-legged suspension structure is cancelled, the installation process is simplified, the design is reasonable, the structure is novel and simple, the appearance is beautiful, and the cleaning is convenient.

3. Drum, housing, foundation plate are polished;All fasteners are stainless steel;The transmission parts are sealed with stainless steel;Seals are silicone rubber, with cleaning spray system, the whole machine in line with GMP health requirements.

4. The imported high viscosity liquid damping agent type vibration isolator connected with the plate makes all the energy generated by the vibration of the centrifuge be absorbed by the vibration isolator and has no vibration interference to the foundation ground and surrounding equipment.

5. The machine case is equipped with fully open big cover, convenient unloading, good tightness, especially suitable for solid and liquid separation of toxic and harmful media, the use of explosion-proof motor frequency conversion drive, anti-static triangle belt, nitrogen protection can be applied to the solid and liquid separation of inflammable and explosive materials.

6. The whole machine is airtight, explosion-proof and clean.

待分離的物料經進料管進入高速旋轉的離心機轉鼓內，在離心力場的作用下，物料通過濾布（濾網）過濾，液相經出液管排出，固相則截留在轉鼓內。

待轉鼓內濾餅達到機器規定的裝料量時，停止進料，對濾餅進行洗滌，同時將洗滌液濾出。濾餅脫液達到要求后，停機。專用的吊具將濾袋連同濾餅一起吊出至指定卸料處，打開卸料口，將濾餅卸出，然后將濾袋復位，進入待機狀態。

The material to be separated enters into the spinning drum of the centrifuge with high speed through the feeding tube. Under the action of centrifugal force field, the material is filtered through the filter cloth (screen), the liquid phase is discharged through the outlet tube, and the solid phase is retained in the spinning drum.

When the filter cake inside the drum reaches the loading quantity specified by the machine, stop feeding, wash the filter cake and filter out the washing liquid at the same time.When the filter cake dewatering meets the requirements, stop the machine.The special spreader lifts the filter bag together with the filter cake to the designated unloading place, opens the unloading port, discharges the filter cake, and then resets the filter bag and enters the standby state.

結構簡單，性能可靠，設計合理，操作維修方便，過濾時間可隨時掌握，濾渣能夠充分洗滌，固體顆粒不被破壞。 

本產品廣泛適用于：化學工業，食品工業，制藥、礦冶、環保、紡織印染（纖維狀物質及印染洗滌后的脫水）等行業。

Simple structure, reliable performance, reasonable design, easy operation and maintenance, filter time can be mastered at any time, filter residue can be fully washed, solid particles are not destroyed.

This product is widely used in: chemical industry, food industry, pharmacy, mining and metallurgy, environmental protection, textile printing and dyeing (fibrous substances and printing and dyeing after washing dehydration) and other industries.